精品综合久久久久久97_亚洲国产精品久久久久婷婷老年_成人区人妻精品一区二区三区_国产精品JIZZ在线观看老狼_国产欧美精品一区二区三区

高壓磨粉機主要適用于加工莫氏硬度9.3級以下，濕度在6%以下的各種非易燃易爆礦產物料的加工，在冶金、建材、化工、礦山、高速公路建設、水利水電等行業有著廣泛的應用，是加工石英、長石、方解石、石灰石、滑石、陶瓷、大理石、花崗巖、白云石、鋁礬土、鐵礦石、重晶石、膨潤土、煤矸石、煤等物料的理想選擇，物料的成品細度可在0.613毫米到0.033毫米之間調整。

      High pressure pulverizer is mainly applied for the powder processing of mineral products in the industries of metallurgy, construction materials, chemical, and mining, etc. It can produce powder from various non- flammable and non-explosive mineral materials with Mohs hardness below 9.3 and humidity at 6%, such as quartz, feldspar, calcite, limestone,talcum, ceramic, griotte, ganite, dolomite, bauxite, iron ore, barite, bentonite, coal gangue, coal, etc. Adjustable range of discharge is 0.613mm to 0.033mm.

性能特點

Features:

1、設計獨特，有效提高產量。主機磨腔內，在梅花架上部設計了1500kg ~ 2000kg的加壓裝置，同等動力下，產量提高10-20%，研磨裝置對物料的碾壓力提高了800-1200kgf, 成品細度*細可達1000目。 

    1、Unique design,improve production efficiently.The grinding cavity of main machine, in the same motor drive, the output is increased by 10-20%, because of there is a 1,500-2,000kg pressure device upon the star rack. And the finish fineness can reach to 1,000 mesh, result of grinder pressure increased by 800-1,200kg by grinder device.

2、物料適用性強，可針對莫氏硬度9.3級以下的各種物料。

    2、All the mineral materials with Mohs hardness below 9.3 can be crushed.

3、保護環境，除塵效果完全達到國家的標準。

    3、Environment protection, its dust-removing effect exactly meets the National Dust Discharge Standard.

4、高壓磨粉機成品粒度范圍廣，粒徑*粗可達毫米(30目)，粒徑一般可達0.033毫米(425目) ，少部分物料*細可達到0.013毫米(1000目);

    4、The finished powder has a wide range of particle size from the maximum particle diameter of 0.613mm (30mesh) to the finest diameter of 0.013mm (1000mesh), while the normal particle diameter is around 0.033mm (425mesh).

5、磨輥、磨環更換周期長，剔除了離心粉碎機易損件更換周期短的弊病。

    5、Grinding roller、grinding ring long working life, avoiding from the disadvantage of quick-wear part short working life of centrifugal mill.

6、研磨裝置采用重疊式多級密封，密封性能好。

7、Grinder device adopt superimposed multistage seal, the better seal ability.l

注：技術參數如有變動，恕不另行通知。Any change of technical data shall not be advised additionally.