<b id="acoce"></b>
參考價格
面議型號
PLG品牌
常州佳發產地
常州樣本
暫無工作原理：
其他干燥介質：
其它適用物料：
多種可用操作方式：
連續式看了PLG系列盤式連續干燥機的用戶又看了
留言詢價
電話詢價
虛擬號將在 180 秒后失效
使用微信掃碼撥號
概述：
★盤式連續干燥器是一種高
效的傳導型連續干燥設備。其獨特的結構和工作原理決定了它具有熱效率高、能耗低、占地面積小、配置簡單、操作控制方便、操作環境好等特點，廣泛適用于化工、醫藥、農藥、食品、飼料、農副產品加工等行業的干燥作業。在各行業使用實踐中深受好評。先生產制造常壓、密閉、真空三大類型，1200、1500、2200、3000四種規格，A(碳鋼)、B
（接觸物了部分均勻不銹鋼）、C（在B的基礎上，增加蒸汽管路，主軸及支架為不銹鋼，筒體和頂蓋內襯不銹鋼）。三種材質，干燥面積4-180 ，共幾百種型號的系列產品，并提供與之相配套的輔助設備，可滿足用戶對各種物料進行干燥的需求。
★PLG series continuous plate drier is a kind of high efficiency conducting and continuous drying equipment. Its unipue structure and operating principle provide advantages of high heat efficiency ,low energy consumption, less occupying area, simple configuration, easy operation and control as well as good operating environment etc, it is widely used in drying process in the fields of chemical, pharmaceuticals, agricultural chemicals, foodstuff,feed,agricultural prouct and by products processing etc. and is well received by various industries. Now there are there big categories, normal pressure, closed and vacuum styles and four specifications of 1200,1500,2200and 3000,and three kinds of medium A(carbon steel),B(stainless steel for contact parts) and C(on the basis of B to add stainless steel for steam pipes, main shaft and support,and stainless steel linings for cylinder body and top cover).With a drying area of 4 to 180 square meters, now we have hundreds of models of series rrouducts and various kinds of auxiliary devices available to meet requirements of various pround
原理：
★濕物料自加料器連續地加到干燥器上部**層干燥盤上，帶有耙葉的耙臂做回轉運動使耙葉連續地翻抄物料。物料沿指數螺旋線流過干燥盤表面，在小干燥盤上的物料被移送到外緣，并在外緣落到下方的大干燥盤外緣，在大干燥盤上物料向里移動并從中間落料口落入下一層小干燥盤中。大小干燥盤上下交替排列，物料得以連續地流過整個干燥器。中間的干燥盤內通入加熱介質，加熱介質形式有飽和蒸汽、熱水和導熱油，加熱介質由干燥盤的一端進入，從另一端導出。已干物料從*后一層干燥盤落到殼體的底層，*后被耙葉移送到出料口排出。濕份從物料中溢出，由設在頂蓋上的排濕口排出，真空型盤式干燥器的濕氣由設在頂蓋上的真空泵口抽出。從底層排出的干物料可直接包裝。通過配備翅片加熱器、溶劑回收冷凝器、布袋除塵器、干料返混機構、引風機等輔機，可提高其干燥的生產能力， 干燥膏糊狀和熱敏性物料，可方便地回收溶劑，并能進行熱解和反應操作。
★Wet materials are fed continuously to the top drying layer in the drier. They will be turned and stirred continuously by harrows’ s arm rotates, the material flows through the surface will be moved to its exterior edge and drop down ti the exterior edge of the large drying plate underneath, And will then be moved inward and drop down form its central hole to the small drying plate on the next layer. Both small and large drying plates are arranged alternately so as materials can go through the whole drier continuously. The heating media, which could be saturated steam, hot water or thermal oil will be led into drying plates from one end to other end of the drier. The dried product will drop from the last layer of the drying plate to the bottom layer of the body, and will be moved by harrows to the discharge outlet. The moisture exhausts from materials and will be removed from the moist discharge outlet on the top cover, or sucked out by the vacuum pump on the top cover for vacuum-type plate drier. The dried product discharged form the bottom layer can be cover for vacuum-type plate drier. The dried product discharged from the bottom layer can be packed directly. The drying capability can be raised up if equipped with supplementary devices such as finned heater, condenser for solvent recovery, bag dust filter, return and mix mechanism for dried materials and suction fan etc. solvent in those paste state and heat sensitive materials can be easily recovered, and thermal decomposition and reaction can be also carried out.
技術參數：
規格 Model | 外徑(mm) Diamter | 高度(mm) High | 干燥面積(m2) Area of dry | 功率(kw) Power | ||
1200/4 |
1850 | 2608 | 3.3 | 1.1 | ||
1200/6 | 3028 | 4.9 | ||||
1200/8 | 3448 | 6.6 | 1.5 | |||
1200/10 | 3868 | 8.2 | ||||
1200/12 | 4288 | 9.9 | ||||
1500/6 |
2100 | 3022 | 8.0 | 2.2 | ||
1500/8 | 3442 | 10.7 | ||||
1500/10 | 3862 | 13.4 | ||||
1500/12 | 4282 | 16.1 | 3.0 | |||
1500/14 | 4702 | 18.8 | ||||
1500/16 | 5122 | 21.5 | ||||
2200/6 |
2900 | 3262 | 18.5 | 3.0 | ||
2200/8 | 3682 | 24.6 | ||||
2200/10 | 4102 | 30.8 | ||||
2200/12 | 4522 | 36.9 | 4.0 | |||
2200/14 | 4942 | 43.1 | ||||
2200/16 | 5362 | 49.3 | 5.5 | |||
規格 Model | 外徑(mm) Diamter | 高度(mm) High | 干燥面積(m2) Area of dry | 功率(kw) Power | ||
2200/18 | 2900 | 6202 | 61.6 | 7.5 | ||
2200/20 | 6622 | 67.7 | ||||
2200/22 | 3800 | 7042 | 73.9 | 11 | ||
2200/24 | 7462 | 80.0 | ||||
2200/26 | 4050 | 48 | ||||
3000/8 |
5782 | 4650 | 60 |
13 | ||
3000/10 | 5250 | 72 | ||||
3000/12 | 5850 | 84 | ||||
3000/14 | 6450 | 96 | ||||
3000/16 | 7050 | 108 | ||||
3000/18 | 7650 | 120 |
15 | |||
3000/20 | 8250 | 132 | ||||
暫無數據！ 制粒是多種固體制劑的基礎操作單元，在中成藥中也較為常見。制粒產品可能是最終成品，如中藥顆粒劑，也可能是中間產品，如膠囊劑、片劑等。中藥劑型生產中廣泛應用的制粒工藝主要有濕法擠出制粒、干法制粒、流化床制 河北一然生物科技有限公司，專注奶牛反芻食用益生菌！常州佳發設備已經成功投產！益生菌在經過反芻包衣之后，能夠讓奶牛的吸收效果更佳！ 應 用 概 述 General of applications FLP 多功能流化造粒包衣機是集噴霧干燥-制粒-離心制丸-流化包衣干燥于一體的多功能 設備。該機兼容多種工藝操作。特別適用于 物料簡介：酸化劑，同義詞為飼料酸化劑，飼料酸化劑是繼抗生素之后，與益生素、酶制劑、微生態制劑等并列的重要添加劑，是一種無殘留、無抗藥性、無毒害作用的環保型添加劑。工藝簡介：使用白炭黑吸附甲酸作為芯材， 物料簡介：雞精僅是味精的一種，其主要成分都是由谷氨酸鈉發展而來，鮮度是谷氨酸鈉的兩倍以上。由于雞精中含有鮮味核苷酸作為增鮮劑，具有增鮮作用，純度低于味精。雞精是一種復合鮮味劑，是日常使用的調味品。雞精 物料介紹：硫酸錳是合成脂肪酸的作物需要的微量元素，因此硫酸錳可以做為肥料施進土壤，可以增產。硫酸錳加到動物飼料中，有催肥的效果。硫酸錳也是制備其它錳鹽的原料和分析試劑。在電解錳、染料、造紙以及陶瓷等工
|
移動端
工商已核實
PLG系列盤式連續干燥機的工作原理介紹？
